Stator Base Assembly for Yamaha YZ125 YZ125X – B4X-85560-00 / 02

New aftermarket four-pole stator base assembly with pickup coil, connector and rubber grommet. Six wires, six pins, one plug and three fixing holes. Inner diameter 28 mm; outer diameter 58 mm. One assembly.

Part references

B4X-85560-00; B4X-85560-02

References identify compatibility; this is an aftermarket part.

Listed applications and restrictions

• Fit for Yamaha YZ125 YZ125N2L 2022
• Fit for Yamaha YZ125 YZ125P2L 2023
• Fit for Yamaha YZ125X YZ125XP 2023
• Fit for Yamaha YZ125 YZ125RL 2024
• Fit for Yamaha YZ125 50TH YZ125RSE 2024
• Fit for Yamaha YZ125X YZ125XR 2024
• Fit for Yamaha YZ125 YZ125SL 2025
• Fit for Yamaha YZ125X YZ125XS 2025
• Fit for Yamaha YZ125 MONSTER YZ125N2ME 2022
• Fit for Yamaha YZ125 MONSTER YZ125P2ME 2023
• Please check and comfirm the number of stator poles is the same as ours and if your connectors and harness looks like the one in the photo before purchasing.

Installation notes

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier.
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors
• The stator may use a different wire color code than your original.
• All of the wires are installed in the correct order; please do not change any of the wiring configurations.
• This stator is designed as a direct plug-in replacement and should be used as such.
• When bolting stator in, always use locking compound.
• If the stator includes a pickup coil, always make sure the air gap is correct upon installation.

Begin with a fully charged battery; check battery condition before installation.

Match the listed references, application, measurements and photos to your original part before ordering.