Stator Generator for Explorer Urano Argon / SMC Jumbo – 35560-MAX-00

New aftermarket stator generator with connector and rubber grommet. One stator supplied. Compare the number of pins and plugs with your original part.

Part references

35560-MAX-00

References identify compatibility; this is an aftermarket part.

Listed applications and restrictions

• OEM:35560-MAX-00
• For Explorer ATV Urano DLS 700
• For Explorer ATV Urano 750 EFI DLX
• For Explorer ATV Argon 700
• For Explorer ATV Argon 700 XL
• For Explorer ATV Argon 700 DELUXE
• For Explorer ATV Argon 750 EFI XL DLX
• For Explorer ATV Argon 700 DELUXE LOF
• For ONLINE ATV X 7.5 EFI 4x4 LOF
• For ONLINE ATV X 7.5 EFI EPS 4x4 LOF
• For SMC ATV Max 700
• For SMC ATV Max 700LE
• For SMC ATV Jumbo 700
• For SMC ATV Jumbo 720R 4x4
• For SMC ATV Jumbo 720R 4x4 MAX
• For BaltMotors ATV Jumbo 700
• For BaltMotors ATV Jumbo 750

Installation notes

• Check the AC output of the stator.
• Replace any burned or corroded connectors on stator and regulator/rectifier.
• Check and repair any melted wiring.
• Use hi-temp dielectric grease on all connectors
• The stator may use a different wire color code than your original.
• All of the wires are installed in the correct order; please do not change any of the wiring configurations.
• This stator is designed as a direct plug-in replacement and should be used as such.
• When bolting stator in, always use locking compound.
• If the stator includes a pickup coil, always make sure the air gap is correct upon installation.

Begin with a fully charged battery; check battery condition before installation.

Match the listed references, application, measurements and photos to your original part before ordering.