Timing Chain Kit Fit For Toyota Landcruiser FZJ75 FZJ78 FZJ79 FZJ80 FZJ105 1FZ-FE 4.5L 1993-2006
Installation Tips 1. When The Chains Have Been Assembled, The Timing Tensioners Must Be Completely Released To Maintain Tension. Pulling Out The Pins Is Not Good Enough. 2. All The Timing Tensioners Must Be Pressed In, So The Internal (Mechanism) Can Fully Pop Out And Operate Properly. 3. Afterwards The Motor Needs To Be Rotated (By Hand, Not With Car On) For 1 Complete Spin Revolution Clockwise To Make Sure The Parts Have Been Fitted 100%. If This Isn't Adhered To, Noisy Chains Will Be Apparent On Start Up. 4. There May Be A Slight Discrepancy For Some Vehicles Built Near The Borderling Changeover Period Of The Timing Chain. If You Are Unsure Please Remove The Cam Cover And Inspect The Chains That Run Over The Cam Gears. 5. If You Are Considering Changing The Lower Timing Guide, The Oli Pump Should Be Replaced At The Same Time Because A Replacement Guide Is Usually Already Attached To The Oil Pump.
Vehicle Fitment
Toyota LandCruiser FZJ75,FZJ78,FZJ79,FZJ80,FZJ105 4.5L 1FZ-FE DOHC 24V Chain Drive
Please compare the part numbers, specifications and images with your original component before ordering.
We post items Australia wide via third party delivery contractors. The majority of items have a flat postage fee of $30 which is combined if you purchase more than one item (conditions apply).
Additional postage fees may be charged for bulky items or deliveries to rural or remote locations.